When To Use What Type Of Control Cable Wire Shielded Cat5e Cable

When should I use Control Cable Wire's shielded CAT5e cable?

If you want to ensure maximum speed and efficiency from your network under any circumstances, you may want to use a shielded CAT5e cable. It's hard to know when and where you'll have enough EMI to cause a problem, but if you're using a shielded CAT5e cable in the first place, you don't have to worry about ripping the cable out of the wall to replace it with that problem.

Making sure your network is up and running is especially important in your business or office building, but it's just as important for your home network.

What type of shielded CAT5e cable should I use?

Shielded CAT5e cable is commonly referred to as STP CAT5e or Shielded Twisted Pair CAT5e. However, the term is used to refer to many different styles of shielding. The most common type of shielding uses so-called screens. This screen is a metal covering that surrounds the entire set of 8 wires in a CAT5e cable. This can be done with a single solid foil wrapped around the wires, braided cable strands wrapped around all the wires, or a combination of the two. This type of wiring is very effective at blocking any EMI that can cause problems in most installations.

If you want to make sure your network is up and running, we recommend that you use STP cables like this for all in-wall cables and other critical cables. This way, you can rest easy knowing you're getting the fastest speed possible from the network.